DEBUG: Executing python function extend_recipe_sysroot
NOTE: Direct dependencies are ['/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/recipes-devtools/qemu/qemu-helper-native_1.0.bb:do_populate_sysroot', '/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/recipes-devtools/qemu/qemu-native_10.2.0.bb:do_populate_sysroot', '/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/recipes-devtools/qemu/qemu-system-native_10.2.0.bb:do_populate_sysroot', 'virtual:native:/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/recipes-devtools/createrepo-c/createrepo-c_1.2.3.bb:do_populate_sysroot', 'virtual:native:/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/recipes-devtools/dnf/dnf_4.24.0.bb:do_populate_sysroot', 'virtual:native:/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'virtual:native:/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/recipes-devtools/unfs3/unfs3_0.11.0.bb:do_populate_sysroot']
NOTE: Installed into sysroot: []
NOTE: Skipping as already exists in sysroot: ['gettext-minimal-native', 'llvm-tblgen-native', 'cmake-native', 'libtool-native', 'm4-native', 'qemu-helper-native', 'qemu-native', 'qemu-system-native', 'texinfo-dummy-native', 'mesa-tools-native', 'openssl-native', 'libslirp-native', 'expat-native', 'gettext-native', 'glib-2.0-native', 'libxml2-native', 'ncurses-native', 'readline-native', 'util-linux-libuuid-native', 'util-linux-native', 'zlib-native', 'binutils-native', 'chrpath-native', 'clang-native', 'libclc-native', 'llvm-native', 'createrepo-c-native', 'dnf-native', 'elfutils-native', 'file-native', 'flex-native', 'gnu-config-native', 'json-c-native', 'libcomps-native', 'libdnf-native', 'libedit-native', 'libmodulemd-native', 'librepo-native', 'lua-native', 'make-native', 'perl-native', 'pseudo-native', 'python3-build-native', 'python3-calver-native', 'python3-cython-native', 'python3-editables-native', 'python3-flit-core-native', 'python3-hatchling-native', 'python3-installer-native', 'python3-mako-native', 'python3-markupsafe-native', 'python3-packaging-native', 'python3-pathspec-native', 'python3-pluggy-native', 'python3-pygments-native', 'python3-pyproject-hooks-native', 'python3-pyyaml-native', 'python3-setuptools-scm-native', 'python3-setuptools-native', 'python3-trove-classifiers-native', 'python3-typing-extensions-native', 'python3-vcs-versioning-native', 'python3-wheel-native', 'python3-native', 'rpm-native', 'swig-native', 'unfs3-native', 'bzip2-native', 'diffutils-native', 'libarchive-native', 'libidn2-native', 'libsolv-native', 'libtirpc-native', 'lzlib-native', 'unzip-native', 'xz-native', 'zstd-native', 'gobject-introspection-native', 'libdrm-native', 'libepoxy-native', 'libsdl2-native', 'mesa-native', 'spirv-headers-native', 'spirv-llvm-translator-native', 'spirv-tools-native', 'virglrenderer-native', 'wayland-protocols-native', 'wayland-native', 'xrandr-native', 'libpciaccess-native', 'libpthread-stubs-native', 'libx11-native', 'libxau-native', 'libxcb-native', 'libxdamage-native', 'libxdmcp-native', 'libxext-native', 'libxfixes-native', 'libxrandr-native', 'libxrender-native', 'libxshmfence-native', 'libxxf86vm-native', 'pixman-native', 'xtrans-native', 'xcb-proto-native', 'xorgproto-native', 'makedepend-native', 'util-macros-native', 'dtc-native', 'alsa-lib-native', 'libpng-native', 'acl-native', 'attr-native', 'curl-native', 'gdbm-native', 'gmp-native', 'gnutls-native', 'libtasn1-native', 'gpgme-native', 'libassuan-native', 'libcap-ng-native', 'libcap-native', 'libffi-native', 'libgcrypt-native', 'libgpg-error-native', 'libmicrohttpd-native', 'libpcre2-native', 'libunistring-native', 'libyaml-native', 'nettle-native', 'p11-kit-native', 'popt-native', 'sqlite3-native']
DEBUG: Python function extend_recipe_sysroot finished
DEBUG: Executing python function do_testimage
NOTE: Executing 'TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/recipe-sysroot-native/usr/bin/createrepo_c --update -q TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/oe-testimage-repo/noarch' ...
NOTE: Executing 'TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/recipe-sysroot-native/usr/bin/createrepo_c --update -q TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/oe-testimage-repo/cortexa15t2hf_neon' ...
NOTE: Executing 'TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/recipe-sysroot-native/usr/bin/createrepo_c --update -q TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/oe-testimage-repo/qemuarm' ...
DEBUG: test suites:
test_apt_install_from_repo (apt.AptRepoTest.test_apt_install_from_repo)
test_ping (ping.PingTest.test_ping)
test_ssh (ssh.SSHTest.test_ssh)
test_cpio (buildcpio.BuildCpioTest.test_cpio)
test_galculator (buildgalculator.GalculatorTest.test_galculator)
test_lzip (buildlzip.BuildLzipTest.test_lzip)
test_connmand_help (connman.ConnmanTest.test_connmand_help)
test_connmand_running (connman.ConnmanTest.test_connmand_running)
test_date (date.DateTest.test_date)
test_df (df.DfTest.test_df)
test_dnf_help (dnf.DnfBasicTest.test_dnf_help)
test_dnf_history (dnf.DnfBasicTest.test_dnf_history)
test_dnf_info (dnf.DnfBasicTest.test_dnf_info)
test_dnf_search (dnf.DnfBasicTest.test_dnf_search)
test_dnf_version (dnf.DnfBasicTest.test_dnf_version)
test_dnf_makecache (dnf.DnfRepoTest.test_dnf_makecache)
test_dnf_exclude (dnf.DnfRepoTest.test_dnf_exclude)
test_dnf_install (dnf.DnfRepoTest.test_dnf_install)
test_dnf_install_dependency (dnf.DnfRepoTest.test_dnf_install_dependency)
test_dnf_install_from_disk (dnf.DnfRepoTest.test_dnf_install_from_disk)
test_dnf_install_from_http (dnf.DnfRepoTest.test_dnf_install_from_http)
test_dnf_installroot (dnf.DnfRepoTest.test_dnf_installroot)
test_dnf_installroot_usrmerge (dnf.DnfRepoTest.test_dnf_installroot_usrmerge)
test_dnf_reinstall (dnf.DnfRepoTest.test_dnf_reinstall)
test_dnf_repoinfo (dnf.DnfRepoTest.test_dnf_repoinfo)
test_gcc_compile (gcc.GccCompileTest.test_gcc_compile)
test_gpp2_compile (gcc.GccCompileTest.test_gpp2_compile)
test_gpp_compile (gcc.GccCompileTest.test_gpp_compile)
test_make (gcc.GccCompileTest.test_make)
test_python (gi.GObjectIntrospectionTest.test_python)
test_go_compile (go.GoCompileTest.test_go_compile)
test_go_module (go.GoCompileTest.test_go_module)
test_gohelloworld (go.GoHelloworldTest.test_gohelloworld)
test_kernel_module (kernelmodule.KernelModuleTest.test_kernel_module)
test_ldd (ldd.LddTest.test_ldd)
test_logrotate_wtmp (logrotate.LogrotateTest.test_logrotate_wtmp)
test_logrotate_newlog (logrotate.LogrotateTest.test_logrotate_newlog)
test_syslog_running (oe_syslog.SyslogTest.test_syslog_running)
test_syslog_logger (oe_syslog.SyslogTestConfig.test_syslog_logger)
test_syslog_restart (oe_syslog.SyslogTestConfig.test_syslog_restart)
test_syslog_startup_config (oe_syslog.SyslogTestConfig.test_syslog_startup_config)
test_opkg_install_from_repo (opkg.OpkgRepoTest.test_opkg_install_from_repo)
test_pam (pam.PamBasicTest.test_pam)
test_get_context (parselogs.ParseLogsTest.test_get_context)
test_parselogs (parselogs.ParseLogsTest.test_parselogs)
test_perl_works (perl.PerlTest.test_perl_works)
test_ptestrunner_expectfail (ptest.PtestRunnerTest.test_ptestrunner_expectfail)
test_ptestrunner_expectsuccess (ptest.PtestRunnerTest.test_ptestrunner_expectsuccess)
test_python3 (python.PythonTest.test_python3)
test_rpm_help (rpm.RpmBasicTest.test_rpm_help)
test_rpm_query (rpm.RpmBasicTest.test_rpm_query)
test_rpm_query_nonroot (rpm.RpmBasicTest.test_rpm_query_nonroot)
test_rpm_install (rpm.RpmInstallRemoveTest.test_rpm_install)
test_rpm_remove (rpm.RpmInstallRemoveTest.test_rpm_remove)
test_check_rpm_install_removal_log_file_size (rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size)
test_rust_c_lib_example (rust.RustCLibExampleTest.test_rust_c_lib_example)
test_cargo_compile (rust.RustCompileTest.test_cargo_compile)
test_rust_compile (rust.RustCompileTest.test_rust_compile)
test_scp_file (scp.ScpTest.test_scp_file)
test_stap (stap.StapTest.test_stap)
test_systemd_basic (systemd.SystemdBasicTests.test_systemd_basic)
test_systemd_failed (systemd.SystemdBasicTests.test_systemd_failed)
test_systemd_list (systemd.SystemdBasicTests.test_systemd_list)
test_systemd_boot_time (systemd.SystemdJournalTests.test_systemd_boot_time)
test_systemd_journal (systemd.SystemdJournalTests.test_systemd_journal)
test_systemd_coredump_minidebuginfo (systemd.SystemdServiceTests.test_systemd_coredump_minidebuginfo)
test_systemd_status (systemd.SystemdServiceTests.test_systemd_status)
test_systemd_disable_enable (systemd.SystemdServiceTests.test_systemd_disable_enable)
test_systemd_disable_enable_ro (systemd.SystemdServiceTests.test_systemd_disable_enable_ro)
test_systemd_stop_start (systemd.SystemdServiceTests.test_systemd_stop_start)
test_wayland_info (weston.WestonTest.test_wayland_info)
test_weston_can_initialize_new_wayland_compositor (weston.WestonTest.test_weston_can_initialize_new_wayland_compositor)
test_weston_running (weston.WestonTest.test_weston_running)
test_weston_supports_xwayland (weston.WestonTest.test_weston_supports_xwayland)
test_xorg_running (xorg.XorgTest.test_xorg_running)
DEBUG: Not using kvm for runqemu
QMP Available for connection at TOPDIR/tmp/.dowx__lo
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:56621
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:38415
DEBUG: launchcmd=runqemu snapshot qemuarm TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs.ext4.zst tcpserial=56621:38415 bootparams=" printk.time=1" qemuparams="-pidfile TOPDIR/pidfile_4011344 -S -qmp unix:./.d90yjcl4,server,wait -qmp unix:./.dowx__lo,server,nowait"
DEBUG: runqemu started, pid is 4011628
DEBUG: waiting at most 300 seconds for qemu pid (05/25/26 01:30:26)
DEBUG: QMP Initializing to TOPDIR/tmp/.d90yjcl4
DEBUG: QMP Connecting to TOPDIR/tmp/.d90yjcl4
QMP connected to QEMU at 05/25/26 01:30:27 and took 1.05 seconds
QMP released QEMU at 05/25/26 01:30:27 and took 0.12 seconds from connect
DEBUG: qemu started in 1.16 seconds - qemu procces pid is 4011655 (05/25/26 01:30:27)
DEBUG: qemu cmdline used:
TOPDIR/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-arm -device virtio-net-device,netdev=net0,mac=52:54:00:12:34:04 -netdev tap,id=net0,ifname=tap1,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive id=disk0,file=/home/pokybuild/tmp/core-image-sato-qemuarm.rootfs-20260525010650.ext4.4011628,if=none,format=raw -device virtio-blk-device,drive=disk0 -device qemu-xhci -device usb-tablet -device usb-kbd -machine virt,highmem=off -cpu cortex-a15 -smp 4 -m 512 -device virtio-serial-device -chardev socket,id=virtcon,port=56621,host=127.0.0.1,nodelay=on -device virtconsole,chardev=virtcon -serial tcp:127.0.0.1:38415,nodelay=on -pidfile TOPDIR/pidfile_4011344 -S -qmp unix:./.d90yjcl4,server,wait -qmp unix:./.dowx__lo,server,nowait -serial null -serial mon:vc -vnc unix:/tmp/qemu-tap-locks/tap1.vnc-socket -device virtio-gpu-pci -kernel TOPDIR/tmp/deploy/images/qemuarm/zImage -append root=/dev/vda rw mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1
DEBUG: Target IP: 192.168.7.4
DEBUG: Server IP: 192.168.7.3
DEBUG: Starting logging thread
DEBUG: Starting thread event loop
DEBUG: Connection request received
DEBUG: Setting connection established event
DEBUG: Output from runqemu:
runqemu - INFO - Decompressing TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs.ext4.zst to TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs-20260525010650.ext4
TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs-20260525010650.ext4.zst: 483483648 bytes
runqemu - INFO - Continuing with the following parameters:
KERNEL: [TOPDIR/tmp/deploy/images/qemuarm/zImage]
MACHINE: [qemuarm]
FSTYPE: [ext4]
ROOTFS: [TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs-20260525010650.ext4]
SNAPSHOT: [Enabled. Changes on rootfs won't be kept after QEMU shutdown.]
CONFFILE: [TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs.qemuboot.conf]
runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock failed: [Errno 11] Resource temporarily unavailable
runqemu - INFO - Using preconfigured tap device tap1
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap1.skip to make runqemu skip tap1.
runqemu - INFO - Network configuration: ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Copying rootfs to /home/pokybuild/tmp/core-image-sato-qemuarm.rootfs-20260525010650.ext4.4011628
runqemu - INFO - Copy done in 0.2715616226196289 seconds
runqemu - INFO - Using VNC server at unix:/tmp/qemu-tap-locks/tap1.vnc-socket for graphical output
runqemu - INFO - Running TOPDIR/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-arm -device virtio-net-device,netdev=net0,mac=52:54:00:12:34:04 -netdev tap,id=net0,ifname=tap1,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive id=disk0,file=/home/pokybuild/tmp/core-image-sato-qemuarm.rootfs-20260525010650.ext4.4011628,if=none,format=raw -device virtio-blk-device,drive=disk0 -device qemu-xhci -device usb-tablet -device usb-kbd -machine virt,highmem=off -cpu cortex-a15 -smp 4 -m 512 -device virtio-serial-device -chardev socket,id=virtcon,port=56621,host=127.0.0.1,nodelay=on -device virtconsole,chardev=virtcon -serial tcp:127.0.0.1:38415,nodelay=on -pidfile TOPDIR/pidfile_4011344 -S -qmp unix:./.d90yjcl4,server,wait -qmp unix:./.dowx__lo,server,nowait -serial null -serial mon:vc -vnc unix:/tmp/qemu-tap-locks/tap1.vnc-socket -device virtio-gpu-pci -kernel TOPDIR/tmp/deploy/images/qemuarm/zImage -append 'root=/dev/vda rw mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1'
runqemu - INFO - Host uptime: 536449.31
DEBUG: Waiting at most 1500 seconds for login banner (05/25/26 01:30:27)
DEBUG: Connection from 127.0.0.1:34516
DEBUG: Partial boot log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.18.28-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 15.2.0, GNU ld (GNU Binutils) 2.46) #1 SMP PREEMPT Mon May 11 19:12:30 UTC 2026
[ 0.000000] CPU: ARMv7 Processor [414fc0f0] revision 0 (ARMv7), cr=30c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] OF: fdt: Machine model: linux,dummy-virt
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] OF: reserved mem:
DEBUG: Partial boot log:
Reserved memory: No reserved-memory node in the DT
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 18 pages/cpu s41996 r8192 d23540 u73728
[ 0.000000] Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1
[ 0.000000] printk: log buffer data + meta data: 131072 + 409600 = 540672 bytes
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 131072
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000]
DEBUG: Partial boot log:
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 44453 entries in 131 pages
[ 0.000000] ftrace: allocated 131 pages with 3 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000
DEBUG: Partial boot log:
000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143]
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 62.50MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns
[ 0.000202] sched_clock: 57 bits at 63MHz, resolution 16ns, wraps every 4398046511096ns
[ 0.000414] Switching to timer-based delay loop, resolution 16ns
[ 0.024880] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
[ 0.034108] Console: colour dummy device 80x30
[ 0.106053] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=625000)
[ 0.106393] CPU: Testing write buffer coherency: ok
[ 0.108190] CPU0: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.108396] CPU0: Spectre BHB
DEBUG: Partial boot log:
: enabling loop workaround for all CPUs
[ 0.108506] pid_max: default: 32768 minimum: 301
[ 0.111787] LSM: initializing lsm=capability,landlock
[ 0.112512] landlock: Up and running.
[ 0.116062] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.116116] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.150957] /cpus/cpu@0 missing clock-frequency property
[ 0.151361] /cpus/cpu@1 missing clock-frequency property
[ 0.151408] /cpus/cpu@2 missing clock-frequency property
[ 0.151453] /cpus/cpu@3 missing clock-frequency property
[ 0.151616] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.152552] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.168812] Setting up static identity map for 0x40200000 - 0x40200060
[ 0.172231] rcu: Hierarchical SRCU implementation.
[ 0.172276] rcu: Max phase no-delay instances is 1000.
[ 0.177173] smp: Bringing up secondary CPUs ...
[ 0.209035] CPU1: thread -1, cpu
DEBUG: Partial boot log:
1, socket 0, mpidr 80000001
[ 0.209968] CPU1: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.221302] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.221566] CPU2: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.224226] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.224390] CPU3: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[ 0.225239] smp: Brought up 1 node, 4 CPUs
[ 0.225357] SMP: Total of 4 processors activated (500.00 BogoMIPS).
[ 0.225436] CPU: All CPU(s) started in SVC mode.
[ 0.233402] Memory: 491888K/524288K available (12288K kernel code, 1512K rwdata, 3064K rodata, 2048K init, 348K bss, 28876K reserved, 0K cma-reserved, 0K highmem)
[ 0.249556] devtmpfs: initialized
[ 0.268453] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[ 0.338265] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xfffff
DEBUG: Partial boot log:
fff, max_idle_ns: 19112604462750000 ns
[ 0.339661] posixtimers hash table entries: 2048 (order: 2, 16384 bytes, linear)
[ 0.340328] futex hash table entries: 1024 (65536 bytes on 1 NUMA nodes, total 64 KiB, linear).
[ 0.375451] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.381435] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.391169] cpuidle: using governor ladder
[ 0.394076] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.394179] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.396332] Serial: AMBA PL011 UART driver
[ 0.452213] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[ 0.459668] printk: console [ttyAMA0] enabled
[ 0.503638] 9040000.pl011: ttyAMA1 at MMIO 0x9040000 (irq = 29, base_baud = 0) is a PL011 rev1
[ 0.514584] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.700690] raid6: neonx8 gen() 568 MB/s
[
DEBUG: Partial boot log:
0.873385] raid6: neonx4 gen() 1681 MB/s
[ 1.045106] raid6: neonx2 gen() 1470 MB/s
[ 1.218845] raid6: neonx1 gen() 866 MB/s
DEBUG: Partial boot log:
[ 1.392865] raid6: int32x8 gen() 153 MB/s
DEBUG: Partial boot log:
[ 1.564021] raid6: int32x4 gen() 111 MB/s
DEBUG: Partial boot log:
[ 1.735937] raid6: int32x2 gen() 537 MB/s
DEBUG: Partial boot log:
[ 1.907670] raid6: int32x1 gen() 474 MB/s
[ 1.907831] raid6: using algorithm neonx4 gen() 1681 MB/s
DEBUG: Partial boot log:
[ 2.079629] raid6: .... xor() 766 MB/s, rmw enabled
[ 2.079875] raid6: using neon recovery algorithm
[ 2.087344] SCSI subsystem initialized
[ 2.088798] usbcore: registered new interface driver usbfs
[ 2.089379] usbcore: registered new interface driver hub
[ 2.089716] usbcore: registered new device driver usb
[ 2.090387] pps_core: LinuxPPS API ver. 1 registered
[ 2.090408] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.090508] PTP clock support registered
[ 2.114040] vgaarb: loaded
[ 2.120345] clocksource: Switched to clocksource arch_sys_counter
DEBUG: Partial boot log:
[ 2.193194] NET: Registered PF_INET protocol family
[ 2.197256] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 2.208638] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 2.208917] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 2.209110] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 2.209362] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 2.214076] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.215496] UDP hash table entries: 256 (order: 2, 14336 bytes, linear)
[ 2.215844] UDP-Lite hash table entries: 256 (order: 2, 14336 bytes, linear)
[ 2.218423] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 2.224186] RPC: Registered named UNIX socket transport module.
[ 2.224320] RPC: Registered udp transport module.
[ 2.224409] RPC: Registered tcp transport module.
[ 2.224489] RPC: Registered tcp-with-tls transport modu
DEBUG: Partial boot log:
le.
[ 2.224513] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.224701] PCI: CLS 0 bytes, default 64
[ 2.233699] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ 2.245046] NFS: Registering the id_resolver key type
[ 2.246502] Key type id_resolver registered
[ 2.246565] Key type id_legacy registered
[ 2.257934] Key type cifs.idmap registered
[ 2.264348] cryptd: max_cpu_qlen set to 1000
DEBUG: Partial boot log:
[ 2.433976] xor: measuring software checksum speed
[ 2.437378] arm4regs : 1031 MB/sec
[ 2.443186] 8regs : 578 MB/sec
[ 2.446137] 32regs : 1168 MB/sec
[ 2.450263] neon : 822 MB/sec
[ 2.450404] xor: using function: 32regs (1168 MB/sec)
[ 2.450534] async_tx: api initialized (async)
[ 2.453751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.454041] io scheduler mq-deadline registered
[ 2.455659] io scheduler kyber registered
[ 2.461944] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[ 2.464241] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000
[ 2.466635] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000
[ 2.468485] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[ 2.473707] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[ 2.474132] p
DEBUG: Partial boot log:
ci_bus 0000:00: root bus resource [bus 00-0f]
[ 2.475289] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.476313] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[ 2.479608] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint
[ 2.488282] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 conventional PCI endpoint
[ 2.489311] pci 0000:00:01.0: BAR 0 [io 0x0000-0x001f]
[ 2.491017] pci 0000:00:01.0: BAR 1 [mem 0x00000000-0x00000fff]
[ 2.491822] pci 0000:00:01.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[ 2.496115] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 PCIe Root Complex Integrated Endpoint
[ 2.496373] pci 0000:00:02.0: BAR 0 [mem 0x00000000-0x00003fff 64bit]
[ 2.500261] pci 0000:00:02.0: enabling Extended Tags
[ 2.502474] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 conventional PCI endpoint
[ 2.502720] pci 0000:00:03.0: BAR 1 [mem 0x00000000-0x00000fff]
[ 2.502851] pci 0000:00:03
DEBUG: Partial boot log:
.0: BAR 4 [mem 0x00000000-0x00003fff 64bit pref]
[ 2.510219] PCI: bus0: Fast back to back transfers disabled
[ 2.513095] pci 0000:00:01.0: BAR 4 [mem 0x10000000-0x10003fff 64bit pref]: assigned
[ 2.515014] pci 0000:00:02.0: BAR 0 [mem 0x10004000-0x10007fff 64bit]: assigned
[ 2.515188] pci 0000:00:03.0: BAR 4 [mem 0x10008000-0x1000bfff 64bit pref]: assigned
[ 2.518017] pci 0000:00:01.0: BAR 1 [mem 0x1000c000-0x1000cfff]: assigned
[ 2.518194] pci 0000:00:03.0: BAR 1 [mem 0x1000d000-0x1000dfff]: assigned
[ 2.518239] pci 0000:00:01.0: BAR 0 [io 0x1000-0x101f]: assigned
[ 2.519560] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 2.521215] pci_bus 0000:00: resource 5 [mem 0x10000000-0x3efeffff]
[ 2.525614] pci 0000:00:02.0: enabling device (0100 -> 0102)
[ 2.540139] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[ 2.545493] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
DEBUG: Partial boot log:
[ 2.779586] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[ 2.781471] printk: legacy console [hvc0] enabled
[ 2.782619] [drm] features: -virgl +edid -resource_blob -host_visible
[ 2.782813] [drm] features: -context_init
[ 2.791870] [drm] number of scanouts: 1
[ 2.793575] [drm] number of cap sets: 0
[ 2.814926] [drm] Initialized virtio_gpu 0.1.0 for 0000:00:03.0 on minor 0
DEBUG: Partial boot log:
[ 3.006315] Console: switching to colour frame buffer device 160x50
[ 3.023369] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[ 3.081714] brd: module loaded
[ 3.083267] virtio_blk virtio1: 1/0/0 default/read/poll queues
[ 3.092451] virtio_blk virtio1: [vda] 944304 512-byte logical blocks (483 MB/461 MiB)
DEBUG: Partial boot log:
[ 3.127344] xhci_hcd 0000:00:02.0: xHCI Host Controller
[ 3.129021] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 3.136357] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[ 3.142916] xhci_hcd 0000:00:02.0: xHCI Host Controller
[ 3.143336] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.146515] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[ 3.159910] hub 1-0:1.0: USB hub found
[ 3.161602] hub 1-0:1.0: 4 ports detected
[ 3.168132] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.173811] hub 2-0:1.0: USB hub found
[ 3.175244] hub 2-0:1.0: 4 ports detected
[ 3.199495] rtc-pl031 9010000.pl031: registered as rtc0
[ 3.204529] rtc-pl031 9010000.pl031: setting system clock to 2026-05-25T01:30:32 UTC (1779672632)
DEBUG: Partial boot log:
[ 3.231126] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 3.246000] usbcore: registered new interface driver usbhid
[ 3.248170] usbhid: USB HID core driver
[ 3.252777] u32 classifier
[ 3.254145] input device check on
[ 3.255663] Actions configured
[ 3.264800] NET: Registered PF_INET6 protocol family
[ 3.287515] Segment Routing with IPv6
[ 3.290688] In-situ OAM (IOAM) with IPv6
[ 3.293789] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 3.303511] NET: Registered PF_PACKET protocol family
[ 3.307067] Bridge firewalling registered
[ 3.312988] l2tp_core: L2TP core driver, V2.0
[ 3.314927] Key type dns_resolver registered
[ 3.319611] NET: Registered PF_VSOCK protocol family
[ 3.323671] Registering SWP/SWPB emulation handler
DEBUG: Partial boot log:
[ 3.362459] registered taskstats version 1
[ 3.397772] Key type .fscrypt registered
[ 3.399039] Key type fscrypt-provisioning registered
[ 3.406410] Btrfs loaded, zoned=no, fsverity=no
[ 3.414057] Key type encrypted registered
[ 3.417588] netconsole: network logging started
[ 3.440552] usb 1-1: new high-speed USB device number 2 using xhci_hcd
DEBUG: Partial boot log:
[ 3.469847] IP-Config: Complete:
[ 3.471153] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[ 3.474402] host=192.168.7.4, domain=, nis-domain=(none)
[ 3.476222] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[ 3.476363] nameserver0=8.8.8.8
[ 3.483232] clk: Disabling unused clocks
[ 3.490812] md: Waiting for all devices to be available before autodetect
[ 3.492965] md: If you don't use raid, use raid=noautodetect
[ 3.494851] md: Autodetecting RAID arrays.
[ 3.495938] md: autorun ...
[ 3.497142] md: ... autorun DONE.
DEBUG: Partial boot log:
[ 3.632299] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[ 3.640411] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
DEBUG: Partial boot log:
[ 3.779193] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.831623] EXT4-fs (vda): mounted filesystem 1c8fe82a-5202-4793-baaa-12c7410ce45f r/w with ordered data mode. Quota mode: disabled.
[ 3.839107] VFS: Mounted root (ext4 filesystem) on device 253:0.
[ 3.846586] devtmpfs: mounted
DEBUG: Partial boot log:
[ 4.050737] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[ 4.091490] Freeing unused kernel image (initmem) memory: 2048K
DEBUG: Partial boot log:
[ 4.303972] Run /sbin/init as init process
[ 4.305800] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
WARNING: Target didn't reach login banner in 1500 seconds (05/25/26 01:55:30)
WARNING: Last 25 lines of login console (17212):
[ 3.406410] Btrfs loaded, zoned=no, fsverity=no
[ 3.414057] Key type encrypted registered
[ 3.417588] netconsole: network logging started
[ 3.440552] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 3.469847] IP-Config: Complete:
[ 3.471153] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[ 3.474402] host=192.168.7.4, domain=, nis-domain=(none)
[ 3.476222] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[ 3.476363] nameserver0=8.8.8.8
[ 3.483232] clk: Disabling unused clocks
[ 3.490812] md: Waiting for all devices to be available before autodetect
[ 3.492965] md: If you don't use raid, use raid=noautodetect
[ 3.494851] md: Autodetecting RAID arrays.
[ 3.495938] md: autorun ...
[ 3.497142] md: ... autorun DONE.
[ 3.632299] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[ 3.640411] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[ 3.779193] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.831623] EXT4-fs (vda): mounted filesystem 1c8fe82a-5202-4793-baaa-12c7410ce45f r/w with ordered data mode. Quota mode: disabled.
[ 3.839107] VFS: Mounted root (ext4 filesystem) on device 253:0.
[ 3.846586] devtmpfs: mounted
[ 4.050737] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[ 4.091490] Freeing unused kernel image (initmem) memory: 2048K
[ 4.303972] Run /sbin/init as init process
[ 4.305800] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
WARNING: Last 25 lines of all logging (21534):
[ 3.495938] md: autorun ...
[ 3.497142] md: ... autorun DONE.
[ 3.632299] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[ 3.640411] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[ 3.632299] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[ 3.640411] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[ 3.779193] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.831623] EXT4-fs (vda): mounted filesystem 1c8fe82a-5202-4793-baaa-12c7410ce45f r/w with ordered data mode. Quota mode: disabled.
[ 3.839107] VFS: Mounted root (ext4 filesystem) on device 253:0.
[ 3.846586] devtmpfs: mounted
[ 3.779193] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.831623] EXT4-fs (vda): mounted filesystem 1c8fe82a-5202-4793-baaa-12c7410ce45f r/w with ordered data mode. Quota mode: disabled.
[ 3.839107] VFS: Mounted root (ext4 filesystem) on device 253:0.
[ 3.846586] devtmpfs: mounted
[ 4.050737] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[ 4.091490] Freeing unused kernel image (initmem) memory: 2048K
[ 4.050737] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[ 4.091490] Freeing unused kernel image (initmem) memory: 2048K
[ 4.303972] Run /sbin/init as init process
[ 4.305800] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
[ 4.303972] Run /sbin/init as init process
[ 4.305800] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
INIT: version 3.14 booting
WARNING: Check full boot log: TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/testimage/qemu_boot_log.20260525013016
DEBUG: Stopping logging thread
DEBUG: Stop event received
DEBUG: Tearing down logging thread
DEBUG: Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 537957.70
runqemu - INFO - Removing TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs-20260525010650.ext4
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-sato-qemuarm.rootfs-20260525010650.ext4.4011628
tput: No value for $TERM and no -T specified
WARNING: Extra log data read:
/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/lib/oeqa/utils/qemurunner.py:186: ResourceWarning: unclosed <socket.socket fd=22, family=2, type=1, proto=0, laddr=('127.0.0.1', 38415), raddr=('127.0.0.1', 34516)>
return self.launch(launch_cmd, qemuparams=qemuparams, get_ip=get_ip, extra_bootparams=extra_bootparams, env=env)
ResourceWarning: Enable tracemalloc to get the object allocation traceback
DEBUG: Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 537957.70
runqemu - INFO - Removing TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs-20260525010650.ext4
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-sato-qemuarm.rootfs-20260525010650.ext4.4011628
tput: No value for $TERM and no -T specified
DEBUG: Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 537957.70
runqemu - INFO - Removing TOPDIR/tmp/deploy/images/qemuarm/core-image-sato-qemuarm.rootfs-20260525010650.ext4
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-sato-qemuarm.rootfs-20260525010650.ext4.4011628
tput: No value for $TERM and no -T specified
ERROR: Error executing a python function in exec_func_python() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_func_python() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:do_testimage(d)
0003:
File: '/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/classes-recipe/testimage.bbclass', lineno: 126, function: do_testimage
0122: dump-guest-memory {"paging":false,"protocol":"file:%s.img"}
0123:}
0124:
0125:python do_testimage() {
*** 0126: testimage_main(d)
0127:}
0128:
0129:addtask testimage
0130:do_testimage[nostamp] = "1"
File: '/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/classes-recipe/testimage.bbclass', lineno: 379, function: testimage_main
0375: orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception)
0376: try:
0377: # We need to check if runqemu ends unexpectedly
0378: # or if the worker send us a SIGTERM
*** 0379: tc.target.start(params=d.getVar("TEST_QEMUPARAMS"), runqemuparams=d.getVar("TEST_RUNQEMUPARAMS"))
0380: import threading
0381: try:
0382: threading.Timer(int(d.getVar("TEST_OVERALL_TIMEOUT")), handle_test_timeout, (int(d.getVar("TEST_OVERALL_TIMEOUT")),)).start()
0383: except ValueError:
File: '/srv/pokybuild/yocto-worker/qemuarm/build/layers/openembedded-core/meta/lib/oeqa/core/target/qemu.py', lineno: 91, function: start
0087: except (subprocess.CalledProcessError, subprocess.TimeoutExpired, FileNotFoundError) as err:
0088: msg += "Error running command: %s\n%s\n" % (blcmd, err)
0089: msg += "\n\n===== end: snippet =====\n"
0090:
*** 0091: raise RuntimeError("FAILED to start qemu - check the task log and the boot log %s" % (msg))
0092:
0093: def stop(self):
0094: self.runner.stop()
Exception: RuntimeError: FAILED to start qemu - check the task log and the boot log
===== start: snippet =====
===== end: snippet =====
===== start: snippet =====
file: TOPDIR/tmp/work/qemuarm-poky-linux-gnueabi/core-image-sato/1.0/testimage/qemu_boot_log.20260525013016
[ 3.474402] host=192.168.7.4, domain=, nis-domain=(none)
[ 3.476222] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[ 3.476363] nameserver0=8.8.8.8
[ 3.483232] clk: Disabling unused clocks
[ 3.490812] md: Waiting for all devices to be available before autodetect
[ 3.492965] md: If you don't use raid, use raid=noautodetect
[ 3.494851] md: Autodetecting RAID arrays.
[ 3.495938] md: autorun ...
[ 3.497142] md: ... autorun DONE.
[ 3.632299] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[ 3.640411] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[ 3.779193] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[ 3.831623] EXT4-fs (vda): mounted filesystem 1c8fe82a-5202-4793-baaa-12c7410ce45f r/w with ordered data mode. Quota mode: disabled.
[ 3.839107] VFS: Mounted root (ext4 filesystem) on device 253:0.
[ 3.846586] devtmpfs: mounted
[ 4.050737] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[ 4.091490] Freeing unused kernel image (initmem) memory: 2048K
[ 4.303972] Run /sbin/init as init process
[ 4.305800] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
INIT: version 3.14 booting
===== end: snippet =====
DEBUG: Python function do_testimage finished
